VARIOUS SHOTS OF WELDS FROM SCHOOL...
V-Groove
Date: Dec. / 05
Root: Open
Gap: 3/32"
Landing: 3/32"
Bevel: 37.5 degree, double bevel
Material: 3/8" plate
Process: SMAW
Position: Flat
Electrodes: 6011, 1/8" (for both root pass and fill)
Face sides:
(forgot to take a photo of the root side which is the most
important! Duhh..)
Weaving on my 1st "block" that started out as 3/8" plate
[flat] :
Sorry 'bout the rust - took these 2 months after they were done and rusting in
the garage...
6011: |
7018 (?) : |
Side view: |
T Joint weaving [flat]
(6011, 6013, 7018 using 3/32", 1/8", 5/32" - not in any particular order)
2 bend test coupons, SMAW, 3/8" plate, flat, 6011 root, 7018 fill, 3/32" gap, 3/32" landing, 1/8" rod, 37.5 degree bevel :
2 bend test coupons, MIG root, flux core fill, 1/2" plate, horizontal position (2G), 3/32" gap, 37.5 degree bevels :
Lap joints (best one highlighted in yellow), 6011/6013/7018 rod, flat, 1/8", 3/32" and 5/32" rod :
